联系我们

电  话: 010-61162140

传  真: 010-61162140

电子信箱: test@frp.com.cn

地 址: 北京市延庆县康庄镇南251厂


您的位置:主页 > 业务范围 > 检测项目 > GL认证 >

GL认证

  • 测试方法 测试名称
    Testing of resins,hardeners and accelerators,and accelerators resins
    树脂,固化剂,催化剂和固化树脂的测试
    DIN 16945,section 6.2 Temperature rise
    Din 16945, 6.2 温升曲线
    DIN 16945,section 6.3 Gel time
    Din 16945,6.3 凝胶时间
    DIN 16945,section 6.5 Determination of total volume shrinkage from change in density
    Din 16945,6.5 体积收缩率
    ISO 175
    Plastics-Methods of test for the determination of the effects of immersion in liquid chemicals
    《塑料 测定液体化学品对塑料影响的试验方法》  
     
    Effects of immersion in liquid chemicals of plastics
    塑料耐化学品
    ISO 1172
    Textile-glass-reinforced plastics, prepregs, moulding compounds and laminates - Determination of the textile-glass and mineral-filler content - Calcination methods 《纺织玻璃纤维增强塑料、预浸料、模塑料和层压板 纺织玻璃纤维和矿物质填料含量的测定 煅烧法》
     
    Fiber content
    纤维含量
    ISO 1183, method A
    Plastics-Method for determining the density of non-cellular plastics-Part1:Immersion method,liquid pyknometer method and titration method
    《塑料 非泡沫塑料密度的测定 第1部分:浸渍法、液体比重瓶法和滴定法》方法A
     
    Density of non-cellular plastics
    非泡沫塑料密度
    ISO 1675
    Liquid Resin—Determination of density by the pyknometer method《塑料 液体树脂密度的测定 比重瓶法》
     
    Density by the pyknometer
    液体树脂的密度
    ISO 2114
    Plastics-(polyester resins)and paints andpaints and varnishes(binders)-Determination of partial acid value and total acid value
    塑料(聚酯树脂)、色漆和清漆(胶粘合剂) 部分酸值和总酸值的测定
     
    酸值
    ISO 2555
    Plastics—Resin in the liquid state or as emulsions or dispersion—Determination of apparent viscosity by the Brookfield Test method 《塑料 树脂在液态或乳液或分散 表观粘度测定的布鲁克菲尔德测试方法》     
     
    Apparent viscosity of the liquid resin
    液体树脂的表观粘度
    ISO 3001
    Plastics-Epoxy compounds-Determination of epoxy equivalent《塑料 环氧化合物 环氧当量的测定》
     
    Epoxy equivalent of epoxy compounds
    塑料环氧当量
    ISO 3374
    Reinforcement products - Mats and fabrics - Determination of mass per unit area 《增强制品 毡和织物 单位面积质量的测定》
     
     
    Mass per unit area of reinforcement products
    增强制品单位面积质量
     
    ISO 4603
    Textile glass; woven fabrics; determination of thickness 《纺织玻璃纤维 机织物 厚度的测定》     
     
     
    thickness of glass fiber fabrics
    玻璃纤维织物厚度 
     
       
    ISO 75-1
    Plastics-Determination of temperature of deflection under load--Part 1:General test method《塑料 负荷变形温度的测定 第1部分:通用试验方法》
     
    Temperature of deflection under load of  fiber-reinforced plastics
    纤维增强塑料热变形温度
    ISO 75-2
    Plastics—Determination of temperature  of deflection under load—Part2:Plastics and ebonite《塑料 负荷变形温度的测定 第2部分:塑料、硬橡胶和长纤增强复合材料》
     
    Temperature of deflection under load of  fiber-reinforced plastics
    纤维增强塑料热变形温度
    ISO 178
    Plastic-Determination of flexural properties《塑料 弯曲性能的测定》
     
    Flexural properties of plastics
    塑料弯曲
    ISO 527-1
    Plastics -Determination of tensile properties -Part 1: General principles 塑料 拉伸性能的测定 第1部分:总则》
     
    Tensile properties of plastics
    塑料拉伸
    ISO 527-2
    Plastics -Determination of tensile properties -Part 2: Test conditions for moulding and extrusion plastics《塑料 拉伸性能的测定 第2部分:模塑和挤塑塑料的试验条件》
     
    Tensile properties of plastics
    塑料拉伸
     
    ISO 527-4
    Plastics-Determination of tensile properties-Part4:Test conditions for isotropic and orthotropic fibre-reinforced plastic composites《塑料 拉伸性能的测定 第4部分:各向同性和正交各向异性纤维增强复合材料的试验条件》
     
    Plastics tensile
    塑料拉伸
     
    ISO 527-5
    Plastics—Determination of tensile properties—Part 5:Test conditions for unidirectional fibre reinforced Plastic composites
    《塑料 拉伸性能的测定 第5部分:单向纤维增强复合材料的试验条件》
     
    Plastics tensile
    塑料拉伸
     
    ISO 14125, method A
    Fibre-reinforced plastic composites - Determination of flexural properties 《纤维增强塑料复合材料 弯曲性能的测定》方法A
     
    Flexural of fibre-reinforced plastic
    弯曲
    ISO 14126
    Fibre- reinforced plastic composites—Determination of compressive properties in plane direction《纤维增强塑料复合材料 平面方向压缩性能的测定》
     
    Compressive properties in plane direction of  fibre- reinforced plastic
    面内压缩
    ISO 14129
    Fibre reinforced plastic composites —Determination of the in-plane shear stress/shear strain response,including the in-plane shear modulus and strength,by the ±45° tension test method《纤维增强塑料复合材料的面内剪应力测定/剪切应变反应 面内剪切模量和强度的± 45 °拉伸试验方法》
     
    In-plane shear properties of  fibre- reinforced plastic
    面内剪切
    ISO 14130
    Fibre reinforced plastic composites —Determination of apparent interlaminar shear strength by short-beam method《纤维增强塑料复合材料的表面层间短梁剪切强度测定方法》
     
    Apparent interlamin-ar shear strength
    表观层间剪切强度